Loading... Please wait...
Categories
New Products
-
$284.00
-
$1,799.00
-
$809.00
-
$449.00
-
$630.00
Our Newsletter
QSC RMX-5050 2-Channel Power Amplifier
Product Description
The QSC RMX 5050 is a rackmount stereo power amplifier, outputting 1050 Watts per side at 8 Ohms. The unit is suited for a wide range of sound reinforcement applications including professional touring, club date and event performances, and mobile entertainment.
The RMX 5050 is based on a three-tier, Class H design, and is extremely efficient, requiring less AC current while utilizing the best available component upgrades to increase peak power.
The RMX 5050 features balanced 1/4" TRS, XLR and barrier strip inputs, binding posts and Neutrik Speakon(TM) outputs, and front-mounted gain controls, signal and clip LED indicators for monitoring the amplifier's performance during operation.
- Û¢ High output 2-channel power amplifier for club and touring P.A. applications
- Û¢ Advanced thermal performance delivering higher continuous power in 2-ohms stereo or 4-ohms bridged applications
- Û¢ Dual mono high-current power supply for increased reliability and performance, high-current toroidal transformers for greater two-ohm power and low noise
- Û¢ Functions in stereo/parallel/bridged mono modes
- Û¢ Full short circuit, open circuit, thermal, ultrasonic and RF protection
- Û¢ Front panel LED indicators for signal and clip, Front mounted easy-access gain controls
- Û¢ Selectable low-frequency filters (30 Hz or 50 Hz) for speaker protection and increased headroom
- Û¢ Independent, user-defeatable clip limiters for reduced distortion
- Û¢ Full-flow thermal design exhaust at the front, draws cool air into the rack
- Û¢ Balanced 1/4" TRS, XLR, and barrier strip inputs maximize flexibility, binding post and Neutrik Speakon(TM) outputs
- Power Rating
- Rating @ 1 kHz, THD=0.1%
1800W @ 4 ã_ Stereo (per channel)
1100W @ 8 ã_ Stereo (per channel)
2500W @ 2 ã_ Stereo (per channel)
3600W @ 8 ã_ Bridged-Mono
5000W @ 4 ã_ Bridged-Mono
Rating @ 20 Hz - 20 kHz, THD=0.05%
2000W @ 2 ã_ Stereo (per channel)
1600W @ 4 ã_ Stereo (per channel)
1050W @ 8 ã_ Stereo (per channel)
3200W @ 8 ã_ Bridged-Mono
- Damping Factor
- >250 (@ 8 Ohms)
- Input Sensitivity
- 1.42 Vrms for 1050W @8 Ohms
- Input Impedance
- 20 kOhms, balanced
10 kOhms, unbalanced
- Gain
- 36dB
- Frequency Response
- 20Hz - 20kHz, +0/-1dB (LF filter bypassed)
5Hz - 50kHz, +0/-3dB (LF filter bypassed)
- Signal-to-Noise Ratio
- 100dB (20 Hz - 20 kHz, 8 Ohm load)
- Total Harmonic Distortion (THD)
- Input Connections
- 2 x XLR female, balanced
2 x 1/4" TRS phone, balanced
2 x barrier strips
- Output Connectors
- 2 x pair 5-way binding posts
2 x NL-4 Speakon
- Controls Front Panel
- 2 x rotary Level Control knobs
1 x Power switch
- Controls (Rear)
- 1 x 10-pole DIP switch featuring LF filter on/off, LF filter 30/50 Hz
1 x Clip Limiter on/off controls for each channel and switches for selecting Stereo, Parallel, or Bridge mode
Push-button circuit breaker for each channel
- Indicators
- 1 x green Power On LED
2 x yellow Signal LEDs
2 x red Clip LEDs
- Cooling
- 1 x variable-speed fan (back-to-front airflow)
- Power Consumption
- 7 Amps (1/8 power pink noise @4 Ohms)
- Power Requirements
- 100-120 or 220-240VAC, 50/60Hz
- Dimensions
- 19 x 5.25 x 15.9" (483 x 89 x 404mm); 3RU
- Weight
- 75 lbs (34.02kg)
- Specialties
- Detented Level Attenuators
Comprehensive Protection Circuitry
On/Off Muting, DC-fault Power Supply Shutdown
Find Similar Products by Category
Customers Who Viewed This Product Also Viewed
Add to Wish List
Related Products
-
QSC RMX 1450 Power Amplifier $499.00
-
-
-
-
QSC RMX 850 Power Amplifier $369.00
>You Recently Viewed...
© 2011 Extreme Pro Sound. All Rights Reserved | Designed & Managed by Extreme Pro Sound